HP-UX (PA-RISC, ia64) 자료실 - 포기하지 않으면 실패하지 않는다!
Vote Reply Modify Delete Forward Prev Next List

  작성자   : 조성환 [ ladmin ] 추천: 1845, 수정: 1, 조회: 6954, 줄수: 139, 분류: Etc.
콘솔 터미널 모드 (Vt100 / Hpterm) 를 변경하고 싶을때

메뉴화면이 깨져서 (콘솔) 터미널 사용시 불편할때 다음과 같이 터미널 모드를 변경하신후 사용하세요........



콘솔에서 ctrl + b 를 누르시면 gsp 모드로 갑니다.


거기서 ca 를 치시면 terminal 모드를 변경 하실수 있습니다.
변경후 co 명령으로 복귀 (gsp 모드 exit) 하시면 됩니다.


터미널 메뉴에서 hpterm 을 vt100 으로 바꿔주시면 됩니다..

(지금 안 맞는거니까 다른걸로 바꿔주면 되겠죠... Default = hpterm)



(콘솔 접속)


[A400:/] #          


ctrl + b




Leaving Console Mode - you may lose write access.                                                 
When Console Mode returns, type ^Ecf to get console write access.                                                                 

Service Processor login:                        
Service Processor password:                           




                 Hewlett-Packard Guardian Service Processor

   (c) Copyright Hewlett-Packard Company 1999-2002.  All Rights Reserved.

                         System Name: uninitialized



*************************************************************************
                       GSP ACCESS IS NOT SECURE
  No GSP users are currently configured and remote access is enabled.
            Set up a user with a password (see SO command)
                                  OR
      Disable all types of remote access (see EL and ER commands)
*************************************************************************


GSP Host Name:  uninitialized
GSP> ca


CA

This command allows you to modify the local and remote modem serial port
configurations. Current configuration settings:

 Local Console Serial Port bit rate: 9600 bits/s
 Local Console Serial Port Flow Control: Software
 Local Console Serial Port Terminal Type: vt100
 Remote Console Serial Port Modem Protocol: CCITT
 Remote Console Serial Port Modem bit rate: 19200 bits/s
 Remote Console Serial Port Modem Flow Control: Software
 Remote Console Serial Port Modem Transmit Configuration Strings: Enabled
 Remote Console Serial Port Modem Presence: always connected

Do you want to modify the Local Console Serial Port settings? (Y/[N]) y
y

  Current Local Console Serial Port bit rate: 9600 bits/s
  Do you want to modify it? (Y/[N])


  Current Flow Control: Software
  Do you want to modify it? (Y/[N])


  Current Terminal Type: Hpterm
  Do you want to modify it? (Y/[N]) y
y
  Enter Terminal Type (Vt100 / [Hpterm]): v
v
  New Terminal Type: vt100
  Confirm? (Y/[N]): y
y
     -> Terminal Type will be updated.

Do you want to modify the Remote Console Serial Port Modem settings? (Y/[N]) y


..................


Current Modem bit rate: 19200 bits/s
  Do you want to modify it? (Y/[N])


  Current Flow Control: Software
  Do you want to modify it? (Y/[N])


  Transmit Configuration Strings: Enabled
  Do you want to modify it? (Y/[N])


  Modem Presence: always connected
  Do you want to modify it? (Y/[N])

Command execution may take 25 seconds.

  -> Settings have been updated.


GSP Host Name:  uninitialized
GSP>

GSP> co


CO

Leaving Guardian Service Processor Command Interface and entering
Console mode. Type Ctrl-B to reactivate the GSP Command Interface.


[A400:/] #





이전: root 패스워드 변경하기 (싱글모드 ; hpux -is)
다음: HP-UX 용이 아닌 일반 cd를 사용할때 mount 하는 방법 (옵션)
2004/11/18(12:20) from 210.92.85.114
CrazyWWWBoard 2000

Vote Reply Modify Delete Forward Prev Next List
(c) Nobreak Technologies, Inc.